Amity is proud to reveal the launch of the 3 Step Solution
The 3 Step Solution is used to decontaminate and disinfect non-lumened medical devices, including those that cannot be fully immersed in liquid disinfectant or sterilant and cannot be sterilised by heat. The 3 Step Solution provides high-level disinfection in one minute. The 3 Step Solution is not intended for use on critical medical devices which must be sterilised
prior to use on a patient.
3 Step Solution comprises three individually packed, types of wipe:
Step 1: Pre-Clean Wipe
First step in the decontamination process – a non-woven detergent wipe, effective in removing organic and proteinaceous matter from the surface of medical device prior to disinfection.
Step 2: HLD Wipe – a non-woven sporicidal high level disinfection wipe. Effective against spores, mycobacteria, bacteria, viruses and fungi in 60 seconds. No messy activators or wetting required. Non damaging to delicate equipment, no messy activator required and no harmful gases given off when used unlike other peracetic acid or chlorine based wipes.
Step 3: Rinse Wipe – Third and final step in the decontamination process – a non-woven wipe impregnated with de-ionised water, for removal of chemical residues from the device that has been disinfected.
For further details, please email us at firstname.lastname@example.org or contact your nearest distributor.